Power Trowel Tooling
ITEM
PRODUCT
DESCRIPTION
W.HYB.30GR
3″ 30 GRIT SEMI-METAL WET HYBRID
IDEAL FOR REMOVING 40 GRIT METAL BOND SCRATCHES OR AS AN INITAL CUT ON A SALT AND PEPPER FLOOR WHERE NO FLOOR PREP IS NEEDED.
W.HYB.50GR
3″ 50 GRIT SEMI-METAL WET HYBRID
IDEAL FOR REMOVING 80 GRIT METAL BOND SCRATCHES AND FOR REMOVING HEAVY GROUT COATS. GOOD FOR A FINISHING STEP ON GRIND AND SEAL FLOORS.
W.HYB.100GR
3″ 100 GRIT SEMI-METAL WET HYBRID
IDEAL FOR REMOVING GROUT COATS AND PREPARING THE FLOOR FOR THE POLISHING PHASE, ALSO IDEAL FOR REMOVING 150 GRIT METAL BOND SCRATCHES.
W.HYB.200GR
3″ 200 GRIT SEMI-METAL WET HYBRID
IDEAL FOR HONING THE CONCRETE AND PREPARING THE FLOOR FOR CONCRETE DYE AND/OR DENSIFICATION.
W.HYB.400GR
3″ 400 GRIT SEMI-METAL WET HYBRID
IDEAL FOR CREATING A LOW SHEEN MATTE FINISH ON THE FLOOR AND PREPARING IT FOR THE RESIN POLISHING STAGE.
ITEM
PRODUCT
DESCRIPTION
3.EXW.0050
3″ 50 GRIT EX WET HYBRID
IDEAL FOR REMOVING 80 GRIT METAL BOND SCRATCHES AND FOR REMOVING HEAVY GROUT COATS. GOOD FOR A FINISHING STEP ON GRIND AND SEAL FLOORS.
3.EXW.0100
3″ 50 GRIT EX WET HYBRID
IDEAL FOR REMOVING GROUT COATS AND PREPARING THE FLOOR FOR THE POLISHING PHASE, ALSO IDEAL FOR REMOVING 150 GRIT METAL BOND SCRATCHES.
3.EXW.0200
3″ 50 GRIT EX WET HYBRID
IDEAL FOR HONING THE CONCRETE AND PREPARING THE FLOOR FOR CONCRETE DYE AND/OR DENSIFICATION.
3.EXW.0400
3″ 50 GRIT EX WET HYBRID
IDEAL FOR CREATING A LOW SHEEN MATTE FINISH ON THE FLOOR AND PREPARING IT FOR THE RESIN POLISHING STAGE.
ITEM
DESCRIPTION
DRIP.800
THE DRIP SERIES ARE DESIGNED FOR USE ON A DAMP SURFACE ALLOWING THE 800-GRIT RESIN STEP TO BE RAN AFTER THE 400-GRIT WET RESIN OR HYBRID STEP WITHOUT HAVING TO WAIT FOR THE SLAB TO FULLY DRY OUT. THE DRIP SERIES PRODUCE BOTH ENHANCED CLARITY AND A HIGH GLOSS.
ITEM
PRODUCT
DESCRIPTION
11.PRO.50
11″ PROSHINE 50 GRIT
USED AS A FIRST CUT WHEN A LIGHT SALT AND PEPPER FINISH IS DESIRED
11.PRO.100
11″ PROSHINE 100 GRIT
USED AS A FIRST CUT WHEN A CREAM FINISH IS DESIRED
11.PRO.200
11″ PROSHINE 200 GRIT
USED TO CREATE A HONED FINISH AND REFINE THE FLOOR AFTER THE 100 GRIT CUT
11.PRO.400
11″ PROSHINE 400 GRIT
USED TO CREATE A MATTE FINISH AND REFINE THE FLOOR AFTER THE 200 GRIT CUT
11.PRO.800
11″ PROSHINE 800 GRIT
USED TO CREATE A HIGH GLOSS AND REFINE THE FLOOR AFTER THE 400 GRIT CUT